What Is The Cause Of The Cracking Of The Tubular Heater?
Sometimes the tubular heater cracks, which is what we often call the tube burst phenomenon of the tubular heater. So what are the reasons for the phenomenon of tubular heater burst?
1. The first possibility: the power setting of the stainless steel tubular heater is too high, the surface load is too large, and the internal temperature is too high, which will easily cause the internal expansion of the tubular heater, which will lead to explosion.
tube. The so-called moderate grasp is very important, everything exceeds a certain degree, will definitely achieve qualitative change, the same is true for stainless steel tubular heaters. As for the reasonableness of the power setting,
Customers can refer to the company's technical article "Basic Method of Electric Heater Power Calculation" or directly call for consultation: 0755-33858918.
2. The second possibility: it is the problem of magnesium oxide powder. There are many types of magnesium oxide powder, the best of which is modified magnesium oxide powder with high temperature resistance. If you use inferior oxidation
When magnesium powder and stainless steel tubular heaters are working, the internal expansion of the stainless steel heating tubes will also occur, resulting in tube bursts.
3. The third possibility: the surface material of the tubular heater may be the thin wall of the tube, or it may be a stainless steel pipe with seams, which may cause the tubular heater to be easy to crack.
4. The fourth possibility: It is the customer's own problem. The water used for heating by stainless steel electric heating pipes may mostly be groundwater or tap water. There are many impurities and easy
Scale formation, too much and too thick scale will cause the internal temperature of the tubular heater to be unable to diffuse, which will cause the tubular heater to burst.
In summary, the general reasons are the above, so if the tubular heater bursts, we must figure out the reason, and then prescribe the right medicine, so as to improve the long life of the tubular heater designed and manufactured by ourselves, and reduce the customer's cost of use.





