What is screen printed thick film heating technology? What are the screen printed thick film heating elements?
This new type of instant heating technology, which is popular in Europe and the United States, is a screen printing technology that sinters the insulation resistance at a high temperature for up to seven times, and is perfectly attached to the outer wall of the stainless steel tube. Thick film heaters are divided into two main categories according to their shapes, stainless steel thick film heating plates and stainless steel thick film heating tubes.
The screen printed thick film heating elements from the inside to the outside are mainly composed of a stainless steel tube substrate, an inner insulating medium layer, a resistance heating layer and an outer insulating medium layer. Water flows through the stainless steel tube, and the thickness of the inner insulating medium layer is about 100 microns. Due to the short thermal conduction distance from the resistance heating layer to the stainless steel substrate, the thermal resistance is small and the thermal response speed is fast. Among them, the stronger application advantage is the thick film heating tube, the barrel-shaped structure, the natural water channel, and the 360-degree integral channel heating. The overall heating is relatively uniform, and the heating efficiency will not be reduced due to a large number of bubbles on the heater surface. Because the heat can be conducted away in time, the surface temperature of the entire heating tube is not high and will not cause an open flame. Good safety and long service life. The thick film heating tube heating element produced by Jaye Heater: high power density, small size, durable under pressure, no power attenuation, fast thermal response, not easy to scale, and the heat conversion rate is as high as 96%.
