What components are used in electric heating oven ?
Electric heating oven with what heating is more energy saving, at present, both energy saving and environmental protection rights belong to the electric heating tube, electric heating tube is generally used for oven, are finned strip heating element.
The finned electric heating tube is wrapped around the metal heat sink on the surface of the heating tube. Compared with the ordinary electric heating tube, the heat dissipation area has been expanded by 2-3 times. Under the same power conditions, it has the advantages of fast heating, uniform heating, good heat dissipation, high heat dissipation efficiency, long service life, small size of the heating device and low cost. Can be designed according to user requirements, easy to install.
First of all, the oven is heated by electric energy, through the electric heat pipe to reach a certain temperature inside the oven, the object in the oven is heated directly, and equipped with a blower through the air duct to achieve uniform temperature inside the oven. Between the inner and outer wall of the oven by aluminum silicate cotton, aluminum silicate cotton felt, ceramic fiber and other insulation materials filled, so that the outer wall of the oven heat insulation, internal heat preservation, scientific and reasonable design not only saves energy, but also to achieve 0 pollution (electric heating).
Matters needing attention when using:
1, the oven should be placed in the indoor dry and horizontal, to prevent vibration and corrosion.
2. Attention should be paid to safe electricity use. Power knife with sufficient capacity should be installed according to the power consumption of the oven. Choose enough power supply wires and have good grounding wires.
3. For the oven with air blowing, the blower must be turned on during the heating and constant temperature process, otherwise the uniformity of the temperature in the studio will be affected and the heating element will be damaged.
4. When using, the temperature should not exceed the highest operating temperature of the oven.
5. After the work should be cut off in time to ensure safety.
