What are the advantages of silicone rubber heating element oil drum heaters?
Oil drum heater is a kind of silicone rubber heating element. Using the soft and bendable characteristics of the silicone rubber heating element, metal buckles are riveted on the reserved holes on both sides of the heating plate, and the barrels, pipes, and tanks are buckled with springs. Easy and fast installation. The silicone rubber heating plate can be tightly attached to the heated part by the tension of the spring, heating quickly and high thermal efficiency.
Oil drums are standard containers commonly used in factories. It is difficult to suck and discharge fluids with low freezing points such as grease, asphalt, heavy oil, paint, wax products, and petroleum jelly. Especially when the climate is cold, this silicone rubber heating element solves such technical problems.
The silicone rubber oil drum heating elements commonly used in the industry are generally mainly used for heating, tracing, and insulation of barrel-shaped equipment lacking tanks, pipes, and so on. It can be wound directly on the heated part for easy installation and removal. It is especially suitable for dissolving paraffin and preventing waxing of oily objects in winter. Depending on the environment used, the material and shape of the heating object, the temperature of the heater will vary.
The silicone rubber oil drum heating mat is heated to make the liquid and solids in the drum easy to take out, such as the adhesive, grease, tar, paint, paraffin, oil and various resin materials in the drum. The viscosity of the drum is reduced evenly by heating the drum. Reduce the power of the pump. Therefore, this device is not affected by the season and can be used all year round. Sensors are installed on the surface of the silicone rubber heating mat of the oil drum, and the temperature is directly controlled through temperature adjustment.

The functional characteristics of silicone rubbe oil drum heating pad are:
1. Easy to operate: the bottom is equipped with a universal wheel to move, which can be moved directly to the scene to heat the oil drum on the spot.
2. Clean and hygienic: Since it is not an electric heating rod, steam pipe, plug-in heating method, or external fire method, the pollution of the objects in the barrel is avoided.
3. High thermal efficiency: Electric heating mat and insulation layers are evenly installed inside, and a round cover is added to the top, which effectively reduces heat loss.
4. Safe use: This product is equipped with a temperature control switch to control the temperature of the inner wall. When in use, it is optional to adjust the constant temperature. Avoid accidents caused by overheating.
How to use silicone rubber oil drum heating mat correctly
The detailed steps of using the silicone rubber oil drum heating mat are as follows:
1. First, ensure that the fiber heating plate outside the oil drum body is normal, and at the same time ensure that the surface of the object to be heated and the connected spring are in close contact with the oil drum to protect the heated surface. At the same time, it is necessary to strengthen the fixation between the spring and the oil barrel body to avoid falling off during operation.
2. The plug of the object is connected to the power supply of the heater. Need to pay attention to the power of the power supply, which is determined according to the shape, size, and heating requirements of the object.
3. Adjust the temperature controller. Before use, you can adjust the temperature according to the rising and falling arrows. Of course, you can measure the temperature before starting to select the appropriate temperature. Moreover, in the process of adjusting the temperature, the controller will form a memory inventory, but if there is no adjustment for more than ten seconds, it will automatically adjust to the use environment temperature.
4. During the heating process, it is necessary to judge whether the heating is in progress or complete according to the reminder of the indicator light. The indicator light will be on and off to remind. Normally, it will be on to remind the heating, and off to remind the heating is completed.
5. After the heating task of the oil drum heater is completed, ensure that the power supply is disconnected, so as not to forget to disconnect and cause some problems.






