The Operation Steps And Precautions Of The Oil Pressure Of The Mosquito Coil Heating Tube
The mosquito-repellent coil heating tube is one of the structures of the tubular electric heating element. It is placed in a metal tube with an electric heating wire, and the gap is tightly filled with crystalline magnesium oxide with good thermal conductivity and insulation, and bent into a mosquito coil shape . The two ends of the heating wire are connected to the power supply through two lead rods. The mosquito-repellent coil heating tube has the advantages of simple structure, long life, high thermal efficiency, good mechanical strength, and can be bent into various shapes to be safe for use.
Mosquito coil heating tube can be used in shoemaking machinery, chemical machinery, pharmaceutical machinery, automated electronic equipment, wave soldering, reflow soldering machinery, washing and drying machinery, and refrigeration equipment to heat air and media.
The operation steps of the oil pressure of the mosquito-repellent coil heating tube:
1. Place the product after the coil in the oil pressure area.
2. Place the product in the hydraulic mold, and align the two ends of the pipe with the two holes and place them all in.
3. Turn on the oil pressure start switch to press the product in place.
4. The reset button of the start switch automatically ejects the product.
Technical requirements for mosquito-repellent coil heating pipe oil pressure:
1. The thickness of the pipe after hydraulic pressure is (6.2±0.1) mm.
2. Adjust the air pressure to 0.5MPa.
Precautions for the oil pressure of the mosquito-repellent coil heating tube:
1. Adjust the pressure of the hydraulic press and the formation of buffer motion.
2. When placing the product in the hydraulic press, place it in place to prevent deformation of the product.
