Let's Talk About How To Use The Heating Element Correctly
For equipment that can produce harmful radiation, the user must operate at the safe distance specified in the manual. If the heating tube factory has abnormal odor, noise, temperature, etc., the equipment should be stopped and inspected, and the equipment should not be stored and used in a humid, dusty or flammable or corrosive environment. Electric heating appliances that cannot generate high temperatures during work can also not be placed near flammable materials. The machine should be placed in a fixed position, try not to move, and keep it dry and clean.
Customers often ask about their installation methods and precautions. Originally, the heating tube as an electric heating element varies according to its type and installation environment, and the specific installation methods and points of attention are also different. One is the production of the electric heating tube, which is the life of the electric heating tube itself, and the other is the setting and placement of the electric heating tube in the electric heating equipment, which has a great influence on the temperature uniformity of the electric heating equipment and the service life of the electric heating tube.
Generally, flange devices can be divided into connecting flanges (bolted fixing) and welding flanges. Generally low pressure may be right. When the sealing requirements are not too high, you can choose to connect several bolt holes after the flange connection is processed, and the metal gasket can be fixed by the bolt hole at the rear end of the bolt fixing; in the case of high pressure and large diameter, the flange can be fixed. Use welding flanges, and then perform welding.
Ensure that the temperature in the furnace is evenly distributed. Large-scale medium-temperature furnaces and high-temperature furnaces are mainly based on radiation heat transfer. In addition to installing elements on the furnace wall and bottom, it is best to install electric heating tubes on the furnace roof and furnace door. At the same time, in the furnace where the heat loss is large, near the furnace hole, and near the outlet of the vibrating bottom furnace, a few more electric heating tubes should be installed. When the furnace height is lower, place the electric heating tube at the bottom of the furnace body or the furnace top. Do not replace the fusible link with other metal wires that cannot be fused. The fuse to be replaced must meet the specifications specified by the factory, and it is not allowed to replace the electrical tape with non-insulating materials, such as ordinary tape or damp heat pain relief cream. When there is a low-voltage fuse or a leakage current-operated protector on the electric heating equipment, the setting value shall not be changed without the professional staff recalculating according to the anti-shock protection standard.
