How to use the Temperature Limiter Thermostat?
Temperature limiter thermostat has a small on-off temperature difference, high adjustment accuracy, sensitive switch action and long service life. It is widely used in various electric heating appliances such as water boilers, showers, electric tableware, electric ovens, frying pans, medical equipment and so on. Today I will show you how to use it.
Instructions:
1. Use d (terminal) to connect it to the heating circuit as a switch string.
2. Fix the main body of the thermostat and insert the temperature sensor into the medium.
3. Rotate the adjustment shaft to set the desired temperature.
The position of the nut has been set before leaving the factory, so the temperature control range of the thermostat has been set.
If there are special circumstances that require changing the temperature control range (that is, changing the maximum disconnection temperature), it should be adjusted as follows:
1. Place the thermostat in the temperature measuring device and the temperature sensing cylinder in the medium, heat the medium to the required maximum disconnection temperature and maintain a constant temperature.
2. Fix the adjustment shaft, adjust b (adjusting nut) clockwise or counterclockwise with a tool, and first make the thermostat in a conducting state.
3. Then slowly adjust b clockwise until the circuit is disconnected, and then cool down and measure the reset temperature.
Jaye Heater specializes in producing all kinds of thermostats, if you need it, you can consult us at any time.
