How to use mica band heater correctly?
Mica band heater is a kind of high-efficiency band heater with uniform heat distribution, and a metal alloy with excellent thermal conductivity to ensure the uniform temperature of the hot surface and eliminate the hot and cold spots of the equipment. It has the advantages of long life, good heat preservation performance, strong mechanical properties, corrosion resistance and magnetic field resistance. The external heat dissipation surface is equipped with a heat preservation device, and the inner heat dissipation surface is sintered with infrared rays to save electricity.
Precautions for the use of mica band heater
1. For heating and using mica band heater, avoid repeated disassembly and assembly that will cause the alloy resistance wire to break and affect the operating life.
2. Before installation, check whether the installation position is consistent with the mica band heater specification and whether the voltage used is consistent.
3. Mica heating is non-waterproof structure, so do not contact with oil, water, plastic particles during storage, use and installation to prevent leakage.
4. During installation, the stainless steel mica band heater should be closely attached to the heated body. The surface of the heated body should be flat and complete without unevenness.
5. After the mica band heater is used, if it is found that the surface has a scorched black color, it indicates that the heat and the heat dissipation of the heated body are unbalanced, and it should be adjusted in time to prevent burning through .
I hope that through the above introduction, everyone has a general understanding of how to use mica band heater correctly.
