How to deal with the terminal of the silicone heater?
Silica gel is a new type of polymer elastic material. It has excellent high temperature resistance (250-300°C) and low temperature resistance (-40-60°C) performance, good physiological stability, and can withstand repeated harsh and Sterilization conditions, excellent resilience and small permanent deformation (not more than 50% in 48 hours at 200℃), breakdown voltage (20-25KV/mm), ozone and ultraviolet resistance. Radiation resistance and other characteristics, special silicone rubber has oil resistance. This also directly leads to more and more applications of silicone products, and silicone tubes are just one of them. The silicone tube can be used for coating and diversion of various carriers, conforms to the environmental protection level, has a wide range of applications, is healthy and hygienic, and resists blows and tears. Common silicone tubes are: medical silicone tubes, food-grade silicone tubes, industrial silicone tubes, silicone special-shaped tubes, silicone tube accessories, etc. The bonding of silicone tube and silicone tube is also a common problem. Today, I will talk about how to bond the silicone tube to the silicone tube.
Silicone adhesive MW-308AB is needed to bond the silicone tube to the silicone tube. Silicone adhesive MW-308AB is a two-component silicone glue that sticks to silicone. It is mainly used for bonding between silicone tubes, silicone shaped strips, silicone foam boards, silicone Japanese-shaped strips (sealing strips), etc. The combined and bonded silicone products have the advantages of high strength, no brittleness, no whitening, and good resilience. The glue is cured by high temperature heating, so the curing speed is fast, the docking output is high, and the daily output per person for the Japanese word tube docking is about 6000-8000. Can pass various SGS certifications, such as ROHS, FDA, etc. The bonded products have good resilience and are especially suitable for the butt joint between various silicone sealing strips and the molded silicone.
