338 × 338 mm Mica Heaters to France for 3D Printing Equipment
A shipment of 338 × 338 mm mica heaters has been dispatched to a customer in France for use in 3D printing equipment. Rated at 230 V and 820 W, the heaters will be integrated into the customer's equipment.
The project highlights the importance of matching a heating component's dimensions and electrical specifications to the equipment design.
Heater Specifications
| Item | Specification |
|---|---|
| Product | Mica Heater |
| Dimensions | 338 × 338 mm |
| Rated Power | 820 W |
| Rated Voltage | 230 V |
| Equipment Application | 3D Printing |
| Destination | France |
Application Requirements
In 3D printing equipment, heating performance depends on the heater, the heated component, insulation, sensor placement, and temperature-control system working together.
For this project, the specified 338 × 338 mm dimensions define the heater's installation footprint, while the 230 V, 820 W rating establishes its electrical requirements. Mounting and wiring must accommodate these specifications within the equipment.
Heating Solution
The mica heater uses an electrical resistance element insulated with mica to provide heat in a flat configuration.
Key integration considerations include:
Fit within the equipment
The heater's dimensions must match the designated installation area. Mounting arrangements should secure the heater while allowing for thermal expansion.
Heat transfer to the component
Suitable surface contact helps transfer heat effectively. The condition and flatness of the mounting surface should be checked during assembly.
Temperature regulation
A compatible sensor and controller are needed where regulated heating is required. Actual temperature performance depends on the complete assembly and operating conditions.
Electrical connections
Wiring, connections, and protective devices must be suitable for the heater's 230 V supply and 820 W power rating.
FAQ
Q1: What are the specifications of the heaters supplied for this project?
The mica heaters measure 338 × 338 mm and are rated at 820 W, 230 V.
Q2: Can the dimensions and power rating be customized?
Yes. Other dimensions, voltages, power ratings, and connection arrangements can be reviewed against the equipment drawing and heating requirements, subject to manufacturing feasibility.
Q3: What operating temperature can this heater reach?
The 820 W power rating alone does not determine operating temperature. The achievable temperature depends on the heater construction, heated component, insulation, heat losses, and control system. The required temperature should be confirmed during technical review.
Q4: What information is required for a quotation?
Please provide the heater dimensions or drawing, voltage, wattage, target temperature, mounting method, connection requirements, and quantity.
