The operation steps of the oil pressure of the stove coil type heater:
1. Place the product behind the coil in the hydraulic area.
2. Put the product in the hydraulic mold, and align the two ends of the tube with the two holes.
3. Turn on the oil pressure start switch and press the product into place.
4. The reset button of the start switch automatically ejects the product.
The coil type heater oil pressure technical requirements:
1. The thickness of the pipe after hydraulic pressure is (6.2±0.1) mm.
2. The air pressure is adjusted to 0.5MPa.
The coil type heater oil pressure precautions:
1. Adjust the hydraulic press pressure and the formation of buffer motion.
2. When placing the product in the hydraulic press, place it in place to prevent deformation of the product.
