JAYE PTC Foil Heater vs. Flextem PTC Heater: Which Is Better for Battery Thermal Management?
1. Why Is PTC Heating Important for Battery Thermal Management?
Imagine an electric vehicle parked outdoors overnight in winter. When the driver starts the vehicle the next morning, the battery temperature may be much lower than its recommended operating range. Under these conditions, battery charging and discharging performance can be affected, and additional time may be needed to bring the battery to a suitable temperature.
This is where PTC heating technology becomes useful.
PTC (Positive Temperature Coefficient) heating elements use materials whose electrical resistance increases as temperature rises. As the heater warms up, its power output decreases, providing a self-regulating heating characteristic.

For battery thermal management, PTC heating foils can be installed close to battery modules or integrated into a battery pack structure to provide auxiliary heat when needed.
Typical applications include:
- Electric vehicle battery preheating
- Energy storage system heating
- Battery module temperature maintenance
- Low-temperature protection for industrial batteries
- Auxiliary heating for portable battery systems
Unlike conventional heating elements that maintain relatively constant resistance, PTC heaters can adjust their power output according to temperature changes. This makes them an attractive option for applications where heating safety and energy management are important.
2. Flextem PTC Heaters: A Specialized Solution for Battery Applications
Flextem is a German manufacturer specializing in flexible heating foils, technical films, adhesive tapes, and related components.
Its product range includes PTC heating foils, etched foil heaters, silicone rubber heaters, and fabric heating elements. The company serves several industries, including automotive, battery technology, medical equipment, and consumer electronics.
-
PTC Heating Foils for Electric Vehicle Batteries
Consider an electric vehicle operating in a region where winter temperatures frequently fall below freezing.
When the vehicle is parked for several hours, the battery pack gradually loses heat. Before the battery can operate under demanding conditions, an auxiliary heating system may be required.
Flextem's PTC heating foils are designed for applications such as lithium-ion battery temperature management. Their self-regulating properties allow heating output to respond to changing thermal conditions.
Flextem also offers customized heating foil designs, with heating patterns and dimensions adapted to specific installation requirements.
-
Other Automotive Applications
Beyond battery heating, Flextem's flexible heating technology is used in several automotive applications:
Heated exterior mirrors for improved visibility in winter.
Camera and optical lens heating to reduce fogging.
Pipe and fluid system heating for frost protection.
Urea (AdBlue) heating systems in vehicle exhaust treatment.
Interior heating solutions for improved passenger comfort.
These applications demonstrate how thin heating foils can be integrated into automotive components where installation space and reliable heat delivery are important.
3. JAYE PTC Foil Heaters: Flexible Heating Solutions for Different Applications
JAYE HEATER specializes in customized electric heating elements, including PTC film heaters, PTC film and strip heaters, silicone rubber heaters, and other flexible heating solutions.
Our PTC film heaters use PTC heating materials integrated with insulating film. Depending on the product design, the heating structure can be adapted to different electrical and installation requirements.
-
Supporting Battery Heating Requirements
Imagine an energy storage system installed in an outdoor container. During winter, low ambient temperatures can affect battery operating conditions.
An auxiliary heating element can help bring the battery system toward its required operating temperature before normal operation.
For these projects, the heating element needs to be considered together with the battery module dimensions, installation space, voltage, power requirements, and heat distribution.
JAYE can work with customers to evaluate these specifications and develop a suitable customized heating solution.
-
Flexible Heating for Electronic and Industrial Equipment
PTC heating is not limited to battery applications.
For example, an outdoor electronic control cabinet may experience significant temperature changes between day and night. Moisture can accumulate inside the enclosure, potentially affecting sensitive electrical components.
A properly designed auxiliary heater can help reduce condensation by maintaining suitable internal temperatures.
Other potential applications include:
Electronic equipment heating
Industrial instrument temperature maintenance
Household appliances
Compact heating devices
Selected automotive components
With customized dimensions and electrical specifications, JAYE aims to provide practical heating solutions for different equipment designs.
4. JAYE PTC Foil Heater vs. Flextem PTC Heater
Both JAYE and Flextem offer PTC heating solutions, but their product portfolios and published technical information have different focuses.
The following comparison highlights their publicly described products and capabilities.
| Comparison | JAYE HEATER | Flextem |
|---|---|---|
| Country | China | Germany |
| Main products | PTC film heaters, PTC film and strip heaters | PTC heating foils, etched foil heaters, silicone heaters, fabric heaters |
| Heating technology | PTC ceramic heating structure with insulating film in its published PTC film heater | Printed PTC heating foil technology |
| Customization | Customized heating element development | Customized heating foil development |
| Battery applications | Heating solutions can be evaluated according to project requirements | Specifically promotes lithium-ion battery heating foils |
| Automotive applications | Heating solutions for selected automotive-related requirements | Automotive heating foils, mirror heating, optical heating, and fluid system heating |
| Other industries | Industrial equipment, household appliances, electronic devices | Medical, automotive, industrial, and consumer applications |
What Should Buyers Consider?
1. Heating Structure
Different PTC heating technologies may have different electrical characteristics, thermal responses, and installation requirements.
Buyers should confirm the heating material, insulation structure, and heat transfer method before selecting a product.
2. Customized Dimensions
Battery packs and electronic enclosures come in different shapes and sizes. A suitable heating element should fit the available installation area without interfering with other components.
Both suppliers describe customized product development, making dimensions and installation design important points for comparison.
3. Power and Voltage Requirements
The required heating power depends on the battery size, initial temperature, target temperature, insulation, and available heating time.
Voltage and power should therefore be selected according to the actual application rather than using a standard specification for every project.
4. Temperature Control and Safety
PTC self-regulating characteristics can help reduce overheating risks, but they do not replace a complete battery thermal management system.
For battery applications, buyers should also consider independent temperature monitoring, over-temperature protection, insulation performance, and relevant product validation.
5. How to Choose the Right PTC Heating Solution?
The best heating solution depends on the application rather than simply the product name or manufacturer.
Here are three practical examples.
Scenario 1: Electric Vehicle Battery Preheating
An electric vehicle manufacturer is developing a battery pack for vehicles operating in cold climates.
The engineering team needs a thin heating element that can be integrated into the available space around the battery modules.
Important considerations include:
Battery pack dimensions
Required heating power
Operating voltage
Temperature distribution
Insulation and electrical safety
Battery system compatibility
PTC heating foil can be considered when self-regulating heating is an important design requirement.
Flextem has specifically published battery heating foil solutions for this application. JAYE can also evaluate customized PTC heating requirements, subject to the required structure and validation.
Scenario 2: Outdoor Energy Storage Systems
An energy storage manufacturer installs battery cabinets in areas where winter temperatures can become very low.
The heating system needs to provide auxiliary heat without taking up too much internal space.
A customized PTC heating element may be suitable for this type of application, depending on the cabinet design, required heating capacity, and temperature control strategy.
Scenario 3: Industrial Electronic Equipment
An industrial equipment manufacturer uses electronic control cabinets in outdoor environments.
During cold nights, temperature changes may cause condensation inside the cabinet.
A properly positioned auxiliary heater can help maintain a suitable internal temperature and reduce moisture-related problems.
For this type of application, buyers should consider heater dimensions, mounting methods, voltage, power, and the required operating temperature.

6. Why Consider JAYE HEATER as Your PTC Heating Supplier?
Choosing a heating element supplier involves more than comparing product prices. Product customization, manufacturing capabilities, communication, and long-term supply requirements are also important.
JAYE HEATER focuses on customized electric heating elements for industrial and commercial applications.
Our advantages include:
Customized Heating Designs
Different equipment requires different heating dimensions, voltage, and power. JAYE can evaluate customer drawings, samples, and technical requirements to develop suitable heating solutions.
Multiple Heating Product Categories
In addition to PTC heating elements, JAYE offers silicone rubber heaters, flexible thin-film heaters, aluminum foil heaters, and other heating products.
This allows customers to discuss different heating options based on their equipment requirements.
Competitive Manufacturing Costs
For buyers developing new products or sourcing heating elements in batches, manufacturing cost is an important consideration. JAYE aims to provide competitive pricing while maintaining product quality.
Direct Communication and Technical Support
Our team works with customers to understand their application requirements, confirm specifications, and discuss suitable product designs before production.
7. Frequently Asked Questions
Q1: What is the main advantage of PTC heating foil for battery applications?
PTC heating foil has a self-regulating characteristic. As its temperature increases, electrical resistance rises and heating power decreases. This can help reduce overheating risks and support battery auxiliary heating.
Q2: Can PTC heating foil be customized for different battery sizes?
Yes. PTC heating foil can be designed with different dimensions, heating patterns, voltage, and power requirements, depending on the manufacturer's capabilities and the specific application.
Q3: Is PTC heating foil better than a conventional PI heater?
They serve different requirements. PTC heating foil offers self-regulating characteristics, while conventional PI heaters typically use etched metal foil circuits and provide flexible power and resistance design. The right choice depends on the required temperature control, heating performance, and installation conditions.
Q4: Does PTC heating eliminate the need for a temperature controller?
Not necessarily. PTC materials can regulate their heating output as temperature increases, but external temperature monitoring and independent safety protection may still be required, particularly in battery applications.
Q5: What information is needed to customize a PTC heating element?
Customers can provide the following information:
Required voltage
Heating power
Product dimensions
Target operating temperature
Installation method
Application environment
Drawings, pictures, or existing samples
PTC heating technology offers practical advantages for battery thermal management, automotive components, electronic equipment, and industrial applications.
Flextem has established a specialized portfolio of PTC heating foils, including solutions specifically developed for battery and automotive applications. JAYE HEATER provides customized PTC heating elements and a wider range of heating solutions for different industrial and commercial requirements.
For buyers comparing heating suppliers, the most important factors are the heating structure, electrical specifications, installation requirements, product validation, and overall project cost.
Looking for a customized PTC heating solution? Contact JAYE HEATER and send us your drawings or application requirements. Our team will help evaluate a suitable heating element for your project.
Reference
Flextem: Heating Foils for Battery Industry
JAYE HEATER: PTC Film Heater





