The amount of heat dissipated by the finned tube is a virtual amount. If it is not measured, calculated, or the assembly position is improper, it will easily affect the heating.
I can take some measures, such as increasing the number of finned tubes of the radiator, because the water flow through the radiator per hour is stable, then adding finned tubes to the outer wall of the radiator can achieve the forward heat dissipation. It turned out.
Currently, finned tube radiator materials all have a thermal resistance rate, which is inversely proportional to the amount of heat dissipation, that is to say, the higher the thermal resistance rate, the lower the amount of heat dissipation.
Therefore, if you want to increase the heat dissipation capacity of the radiator, you can start from this aspect, and there should be a significant improvement.
In addition, since the radiator mainly dissipates heat by radiation and convection, if the circulation in the atmosphere is not smooth, the heat dissipation will be slower.
For such problems, it is also a good way to improve the atmosphere and smoothness of the house. For example, the radiator can be installed around the window, and the important cold air can be directly heated to achieve the desired result.
