6 Inch 3-Turn Surface Element
Product Details
Jaye Heater Technology Co., Ltd. is one of the most reliable manufacturers and suppliers of 6 inch 3-turn surface element in China, also supports custom service. Welcome to wholesale high quality 6 inch 3-turn surface element at competitive price from our factory.
We build 6-inch 3-turn surface elements for appliance manufacturers producing electric ranges and cooktops. For our OEM customers, the "3-turn" designation is not a cosmetic detail-it is a winding architecture decision with direct consequences for watt density, heat-up rate, and sheath temperature at a given power rating.
The 6-inch 3-turn configuration occupies a specific band in the coil element landscape. Published replacement-channel references place the 240 V / 1,250 W element at three turns, with 208 V operation dropping to roughly 938 W on the same resistance. Some 6-inch three-turn offerings extend to 1,500 W at 240 V; at that power level, the engineering margin between the three-turn and four-turn winding becomes the variable that determines whether the element survives its thermal duty or becomes a warranty return.

Specification of 6 Inch 3-Turn Surface element
The following table summarizes the parameter range we manufacture for 6-inch burner heating elements. We confirm every rating against your appliance's electrical load and thermal design; the values below describe configurations commonly specified, not a fixed catalog part.
The following table summarizes the parameter range we manufacture for 6-inch 3-turn surface elements. We confirm every rating against your appliance's electrical load and thermal design; the values below describe configurations commonly specified for the three-turn format, not a fixed catalog part.
| Parameter | Our standard range | Engineering note |
|---|---|---|
| Outer diameter | 6 in (152.4 mm) | Fixed dimensional envelope for the three-turn winding |
| Winding | 3 turns (standard for 1,250–1,500 W class); 4-turn and 5-turn also available in the same diameter | Turn count is a watt-density lever; see comparison section below |
| Voltage | 120 V / 208 V / 220 V / 230 V / 240 V | Resistance is calculated to the supply voltage so cold wattage falls within tolerance |
| Wattage (3-turn) | 1,250 W @ 240 V reference; 938 W @ 208 V on the same resistance; 1,500 W @ 240 V three-turn available | Published replacement references confirm these pairings for the 6-inch three-turn format |
| Custom wattage | 500 W–3,000 W+ within the 6-inch envelope | Higher wattage in a three-turn winding requires explicit watt-density review |
| Sheath alloy | SUS304 (general corrosion resistance); SUS321 (high-temperature oxidation); Incoloy 840 (thermal fatigue) | Alloy is selected by continuous sheath temperature and atmosphere |
| Tube diameter | 6.5 mm standard; 8.0 mm available | Larger diameter lowers watt density at equal wattage |
| Resistance wire | NiCr (Ni80Cr20) | Stable resistance and formability for coil winding |
| Insulation | Compacted magnesium oxide (MgO) | Dielectric isolation plus wire-to-sheath thermal conduction path |
| Termination | 2-prong or 3-prong plug; silicone or fiberglass lead | Matched to the appliance receptacle and strain-relief design |
| Component certification | UL Certificate |




Feature of 6 Inch 3-Turn Surface element

1. Three-turn winding matched to the 1,250–1,500 W thermal window. The three-turn geometry is the reference winding for the 1,250 W class at 6-inch diameter. It places the resistance wire in three concentric passes across the 152.4 mm surface, giving a defined coil-to-cookware contact pattern. At 1,500 W, the three-turn winding operates closer to its watt-density ceiling, which is why we treat 1,500 W three-turn designs as a reviewed configuration rather than a default extension of the 1,250 W build.
2. Sheath alloy selected by duty, not by SKU convenience. SUS304 covers standard residential simmer-to-boil cycling. SUS321 is specified where repeated high-temperature excursions bring oxidation resistance into play. Incoloy 840 is selected where thermal fatigue and scaling resistance above standard stainless behavior are required. The alloy choice is made against continuous sheath temperature, not the dial setting.
3. MgO compaction held as a specified process parameter. We vibration-load magnesium oxide to density, establishing both the dielectric barrier and the conduction path from coil to sheath. Under-compacted MgO is a documented mechanism for localized hot spots and short-to-ground failures; in a three-turn winding, where the resistance path is shorter and watt density is higher at a given power, the quality of the MgO compaction has less margin for error.
4. Resistance tolerance controlled at the winding stage. Cold resistance determines wattage at the specified voltage. For the 240 V / 1,250 W reference, published diagnostic references list an ideal cold resistance in the range of 46 Ω (derived from the wattage and voltage pairing), with field-acceptable bands broader. We calculate and confirm resistance per production lot against the target market's nominal voltage.
More Detailed Pictures




Application
JAYE burner elements are used in a wide range of cooking and heating appliances:
Electric Stoves and Ranges – Standard coil burner replacements and OEM production
Electric Ovens – Bake and broil elements
Commercial Cooking Equipment – Restaurant ranges, griddles, and warming stations
Marine Galley Stoves – Corrosion-resistant elements for shipboard use
Portable Electric Cookers – Hot plates, single-burner cookers, and camping stoves
Food Warming Equipment – Holding cabinets and warming trays
Specialty Cooking Appliances – Deep fryers, grills, and induction-compatible cookware bases
Ready to Discuss Your Burner Element Requirements?
Whether you're an appliance manufacturer sourcing OEM components, a distributor looking for reliable replacement elements, or an engineer developing a new cooking product, JAYE can supply burner elements built to your exact specifications.
Send us your drawings, samples, or requirements-voltage, wattage, dimensions, material, and quantity-and we'll come back with a quotation and lead time.


FAQ
Q: Why does a 6-inch 3-turn element often carry 1,250 W while a 6-inch 4-turn element is associated with 1,500 W?
The turn count changes the total length of the resistance path within the same 152.4 mm diameter. A shorter path at a given wire gauge and resistivity produces a different resistance, and therefore a different wattage at the same voltage. The four-turn winding gives more sheath surface area to distribute power, which is why it is the conventional route to the 1,500 W class at 6 inches. A three-turn 1,500 W build is possible, but it runs at higher watt density and requires explicit thermal review against the burner duty and sheath alloy.
Q: What happens to a 240 V / 1,250 W three-turn element on a 208 V supply?
The resistance is essentially unchanged, so wattage scales approximately with the square of the voltage ratio. The 240 V / 1,250 W element delivers roughly 938 W at 208 V. Published replacement references confirm this pairing for the 6-inch three-turn format. If your target market includes 208 V supply, the appliance's control strategy and burner duty must be designed around the derated wattage, not the 240 V rating.
Q: Does the three-turn winding heat faster than a four-turn winding?
At equal wattage, the three-turn element concentrates the same power over a shorter resistance path and a smaller sheath surface area, which is consistent with the field characterization of fewer-turn coil elements as faster to heat and cool than more-turn elements in the same diameter. The trade-off is reduced watt-density headroom. Whether "faster" is an advantage depends on the burner's assignment: rapid-boil and sear positions benefit from the response; long-hold and simmer positions may not require it and may be better served by the more distributed four-turn winding.
Hot Tags: 6 inch 3-turn surface element, China, manufacturers, suppliers, factory, wholesale, custom, price, electric, high quality













