Jaye Heater Technology Co., Ltd. is one of the most reliable manufacturers and suppliers of 6" burner heating element in China, also supports custom service. Welcome to wholesale high quality 6" burner heating element at competitive price from our factory.
We supply 6-inch coil burner heating elements to appliance manufacturers building electric ranges, cooktops, commercial holding equipment, and compact cooking appliances. For our OEM customers, the 6-inch format is a defined design slot-not simply a smaller coil. It is the compact burner in the conventional 6-inch / 8-inch layout, typically assigned to simmering, sauce work, smaller cookware, or multi-burner architectures where total power draw must be rationed across more positions.
The engineering problem we solve is not "can the element heat." It is whether the element delivers the same thermal profile across production batches, installs interchangeably in the appliance receptacle, and survives the thermal cycling that drives warranty returns. The variables that determine that outcome are sheath alloy, MgO compaction quality, coil geometry, and watt density relative to the burner position-not a single headline wattage number.

Specification of 6" Burner Heating Element
The following table summarizes the parameter range we manufacture for 6-inch burner heating elements. We confirm every rating against your appliance's electrical load and thermal design; the values below describe configurations commonly specified, not a fixed catalog part.
| Parameter | Our standard range | Engineering note |
|---|---|---|
| Outer diameter | 6 in | Fixed dimensional envelope; coil turns and tube length are adjusted within it |
| Voltage | 120 V / 208 V / 220 V / 230 V / 240 V | Resistance is calculated to the supply voltage so cold wattage falls within tolerance |
| Wattage | 1,250 W–1,500 W (6-inch standard); 500 W–3,000 W+ custom | Cold-condition wattage tolerance typically +5% / −10% |
| Sheath alloy | SUS304 (general); SUS321 (high-temperature oxidation); Incoloy 840 (thermal fatigue) | Alloy is selected by continuous sheath temperature and atmosphere, not by nominal appliance setting |
| Tube diameter | 6.5 mm standard; 8.0 mm available | Larger diameter lowers watt density at equal wattage but increases thermal mass |
| Resistance wire | NiCr (Ni80Cr20) or FeCrAl | NiCr gives stable resistance and formability; FeCrAl offers higher oxidation resistance |
| Insulation | Compacted magnesium oxide (MgO) | Dielectric isolation plus the wire-to-sheath thermal conduction path |





Feature of 6" Burner Heating Element

1. Coil geometry controlled for contact heat transfer. We wind the resistance helix to a defined pitch and center the coil within the sheath, so the tube-to-cookware contact footprint across the 152.4 mm diameter remains consistent from unit to unit. Heat reaches the vessel through direct contact and a thin air gap; coil pitch and contact area-not just wattage-set thermal efficiency.
2. Sheath alloy matched to the actual thermal cycle. We specify SUS304 for standard residential duty. We move to SUS321 or Incoloy 840 when the element sees repeated high-temperature excursions or operates near the upper end of the sheath limit, where chromium carbide precipitation and sigma-phase embrittlement shorten service life. Incoloy sheaths are selected where oxidation and scaling resistance above standard stainless behavior is required.
3. MgO compaction treated as a dielectric and thermal specification. We vibration-load magnesium oxide to density, establishing both the live-wire-to-sheath dielectric barrier and the conduction path from coil to sheath surface. Under-compacted MgO is a documented hot-spot and short-to-ground mechanism: degraded insulation allows the resistance wire to contact the sheath locally, producing a pitted or burned spot rather than uniform heating.
More Detailed Pictures




Application
JAYE burner elements are used in a wide range of cooking and heating appliances:
Electric Stoves and Ranges – Standard coil burner replacements and OEM production
Electric Ovens – Bake and broil elements
Commercial Cooking Equipment – Restaurant ranges, griddles, and warming stations
Marine Galley Stoves – Corrosion-resistant elements for shipboard use
Portable Electric Cookers – Hot plates, single-burner cookers, and camping stoves
Food Warming Equipment – Holding cabinets and warming trays
Specialty Cooking Appliances – Deep fryers, grills, and induction-compatible cookware bases
Ready to Discuss Your Burner Element Requirements?
Whether you're an appliance manufacturer sourcing OEM components, a distributor looking for reliable replacement elements, or an engineer developing a new cooking product, JAYE can supply burner elements built to your exact specifications.
Send us your drawings, samples, or requirements-voltage, wattage, dimensions, material, and quantity-and we'll come back with a quotation and lead time.


FAQ
Q: How do I choose between SUS304, SUS321, and Incoloy 840 for a 6-inch burner element?
Select by continuous sheath temperature and atmosphere, not by the appliance's nominal heat setting. SUS304 is adequate for standard residential cycling. SUS321 is specified where repeated high-temperature excursions approach the upper end of the sheath limit and oxidation resistance becomes limiting. Incoloy 840 is selected where thermal fatigue and scaling resistance above standard stainless behavior are required. The practical question is not "which alloy is best" but "what sheath temperature will this burner see at its highest sustained duty, and for how many cycles."
Q: A 6-inch element and an 8-inch element are rated at the same wattage-can they be treated as equivalent?
No. At equal wattage the 6-inch element distributes the same power over a shorter tube and smaller sheath surface area, so its watt density in W/cm² is higher. Our cooking-surface designs target ≤20 W/cm²; if a 6-inch position is assigned an 8-inch-level wattage, we review the resulting W/cm² and sheath temperature against the alloy's margin before release. Appliance load calculations should assign wattage by burner duty, not by copying the larger position's rating into the smaller envelope.
Hot Tags: 6" burner heating element, China, manufacturers, suppliers, factory, wholesale, custom, price, electric, high quality














