If Ceramic Infrared Heating Element is used in wrong way, it may cause fire and click accidents, resulting in personal injury or damage to machinery and equipment.
Here is going to introduce some aspects you need to pay attention to when using Ceramic Infrared Heating Element.
1) The Ceramic Infrared Heating Element must work under conditions that are not accessible to operators or users. If necessary, please attach a warning sign.
2) The Ceramic Infrared Heating Element is not allowed to work at a temperature higher than the maximum allowable temperature indicated by the radiator, otherwise it will burn out.
3) It is recommended to use a temperature controller (thermostat) to prevent the temperature from exceeding the allowable range. Ceramic Infrared Heating Element with power above 600w should work under temperature control conditions, and Ceramic Infrared Heating Element with temperature sensors must be temperature controlled.
4) After the radiator power supply is disconnected, it still has residual heat. At this time, the human body will be scalded by contact with the Ceramic Infrared Heating Element, and heat-sensitive materials or objects will be burned out.
5) The Ceramic Infrared Heating Element must be prevented from being knocked, bumped and damp.
6) If the Ceramic Infrared Heating Element comes into contact with water, for example, when cleaning the equipment, immediately heat and dry the radiator for a short time.
