The water storage tank heater is a kind of heater that is commonly used in our daily life. Many people report that the water storage tank heater will always burn out, so what should we pay attention to when using the water storage tank heater so that the life of the water storage tank heater can be better? ?
1. The power design should be reasonable and not exceed the standard.
Normally, the power of each meter of heating pipe is 3KW, and the power of water that is easy to scale or is relatively dirty should be designed to be smaller.

2. Pay attention to the installation direction when installing.
a. When installing from the side of the box, pay attention to the length of the outer pipe that needs to be made into a cold zone. We know that the amount of water in the outer pipe is relatively small and the heat flow is slow. It is made into a cold area to prevent the heating tube from being burned out because the heat cannot be absorbed in time.
b. When installing from the top of the box, pay attention to the part that does not touch the water to make it a non-heating area, otherwise it will be easily burnt out.
3. Material selection should be reasonable.

If the heated water is hard and prone to scale formation, then not only should the power be reduced, but also a corrosion-resistant pipe material should be used. Scale is commonly known as calcium carbonate, which is corrosive.
When using the water storage tank heater, it cannot be considered from a certain aspect, and various factors need to be considered comprehensively. You can also consult jaye heater company.





