What are the advantages of mold cartridge heaters?
Generally, mold cartridge heaters use cartrige heaters or double-headed heaters, among which cartrige heaters are the most used. Generally, the diameter of the heating tube is confirmed according to the hole diameter of the mold. Usually the gap between the two is between 0.1-0.2mm. For example, the hole diameter of the mold hole is 10mm, then the mold cartridge heaters can have a diameter of 9.8mm.
So what are the advantages of mold cartridge heaters?
1. Easy to install: punch holes in the mold, and then insert the heating tube directly into the mold hole.
2. Convenient wiring: The structure with one end of the wire can be connected in a limited space, and multiple electric heating tubes can be used at the same time, and the performance will not interfere with each other.
3. High thermal efficiency: small size, high power, high energy, which can generate sufficient heat in a short period of time.
4. High safety: The nickel-chromium alloy wire is used for high temperature resistance, the middle is filled with high temperature insulating magnesium oxide powder. After shrinking the tube, it has better insulation and pressure resistance performance.
5. Specification selection: product specifications and types can be customized and the size is flexible.
