Is it hot enough to be completely immersed in water?
The wire must not be put in water if it heats up quickly, and the sealing of the wire connection will not meet the requirements. Water enters into it, it is easy to cause leakage or short circuit, and it is easy to injure people. When it is heated quickly, It is best to heat it with a thermos.
Precautions for use:
1. In terms of the operating environment, due to the high power of "heating fast", first of all, it is necessary to ensure that the electrical load in the home meets the requirements of "heating fast", and secondly, it is necessary to ensure that the home electrical circuit does not fall off the insulation layer and the sockets are aging. And other phenomena.
2. Choose "Hot it fast" as far as possible to buy products that have passed 3C certification and are equipped with leakage protection devices in large supermarkets.
3. The use of "Hot Fast" must be operated with someone on duty. When using it, the "Hot Fast" should be put into the liquid first. The liquid should at least submerge the heating coil (handles and wires cannot be immersed in the liquid). Then turn on the power again, avoid dry burning, and prevent combustible materials from igniting nearby due to excessive temperature. Turn off the power immediately after use. Do not take out the metal heating tube immediately to prevent burns. You should take it out of the liquid after the "hot fast" temperature drops, and dry it for storage.
