1. When the lead wire is used for bending, it should be bent from the part that is more than 6 mm away from the root. When bending, the lead wire should not be forcibly pulled, pressed or twisted.
2. When the thermal fuse is fixed by screw, riveting or terminal, it should be able to prevent mechanical creep and the occurrence of bad contact.
3. The connecting parts should be able to work reliably within the working range of electrical products, without displacement due to vibration and shock.
4. During the lead welding operation, the heating humidity should be limited to a minimum. Be careful not to add high temperature to the thermal fuse; Do not forcibly pull, press, or twist the thermal fuse and lead; After welding, it should be cooled for more than 30 seconds immediately. .
5. The thermal fuse-link can only be used under the conditions of the specified rated voltage, current and specified temperature, and special attention should be paid to the maximum continuous temperature that the thermal fuse-link can withstand.
