The installation process for a barrel blanket heater on an IBC container is relatively straightforward. Here are the general steps you should follow:
1-Choose the appropriate size and type of barrel blanket heater for your IBC container. Make sure that it is compatible with the type of contents you will be storing.
2-Ensure that the IBC container is clean and dry. It's important to remove any debris or dirt that could damage the insulation material or interfere with the installation process.
3-Open the barrel blanket heater and lay it out on a flat surface. Make sure that the heating element and thermostat are oriented correctly for the IBC container you are working with.
4-Wrap the barrel blanket heater around the IBC container, starting from the bottom and working your way up. Secure the straps or clips provided with the heater to hold it in place.
5-Connect the power cord to an electrical outlet and turn on the power to the heater.
6-Set the thermostat to the desired temperature for the contents of the IBC container. Allow the heater to warm up for a few minutes before checking the temperature inside the container to ensure that it is maintaining the desired temperature.
Periodically check the temperature of the contents inside the IBC container to ensure that it is being maintained at the desired temperature.
