The non-defrosting heater in the refrigerator is in a position where the defrosting heater and the evaporator are intertwined. Defrosting heater generally has thick pipe diameter and thick process without disassembly and assembly problems, so this article mainly describes how to install and remove defrosting heater.
The first step is to unplug the refrigerator first, to ensure that the refrigerator is in a power state during the installation and disassembly process, and then remove the grille board in the refrigerator air duct.
The second step is to find the original defrosting heater in the arc aluminum plate below the evaporator. and then open the two hooks on the defrosting heater to be replaced, and find a good Angle to replace the fixed defrosting heater (some models can remove the defrosting heater without a fixed hook).
*Note:The heater should not be placed in the water tank, it must be installed in its original position on the suspension bracket under the aluminum plate. In the process of removing the defrosting heater, do not damage the round aluminum plate, otherwise the defrosting water will drop on the defrosting heater, damage the defrosting heater, and even burn the refrigerator liner.
