Design requirements for casting aluminum heating plate
(1) Reasonable airflow and temperature rise. The power of the cast aluminum heater rises according to the determined air volume and temperature. It needs to meet the volume and temperature of the rising air. Excessive air should not be used. Excessive temperature rise. Due to large air volume and temperature rise, it will directly lead to overheating power and increase energy consumption. . The air volume is large, and the temperature rise is unnecessary. Comprehensive consideration, reasonable design, determine appropriate parameters.
(2) An insulation layer should be added to the surface of the cast aluminum heater. Most of the devices used for cast aluminum heating only heat the pipe at the outlet of the cast aluminum heater, and the surface of the cast aluminum heater itself does not have any insulated handles. The data shows that, in contrast, the surface energy of the cast aluminum heater increases the insulation layer to reduce the energy consumption by 5%-10%. The long-term operation and the saving of energy consumption are very considerable. The factory should be in an insulation layer while in the pipeline Above, the cast aluminum heater in the air is installed with an insulation layer.
(3) Reduce the pressure loss of the cast aluminum heater itself. The pressure loss caused by heating air flowing through the inside of the cast aluminum heater. The greater the pressure loss, the greater the energy consumption of the fan, and the structure of the cast aluminum heater itself should be improved and innovated, resulting in the smallest pressure loss.
