Attention To The Operation Of Tubular Heater
The tubular heaters are very common in both civil and industrial use, and their use directly determines the heating effect and service life. Jaye Heater will introduce to you the matters needing attention during the use of tubular heaters.
Working conditions of tubular heaters
The tubular heater has no special requirements for the temperature of the working environment, but the humidity of the air in the environment cannot be greater than 95%, and there should be no flammable, explosive or corrosive gas electricity.
The external working voltage of the heat pipe cannot exceed 1.1 times the rated voltage. Before the electric heating pipe is operated, it is necessary to ensure that the shell is effectively grounded to avoid electrical accidents.
The storage location of the tubular heater should be kept dry and proper insulation resistance. If the insulation resistance of the storage environment of the tubular heater is found to be too small during use, it can be restored by low-voltage energization.
Use it after rewriting. The tubular heater should be properly fixed before use, and the wiring part should be placed outside the insulation layer, and avoid contact with corrosive and explosive media and water heater.
When used for heating liquids or metal solids, pay attention to completely insert the tubular heater into the object to be heated, and do not allow the tubular heater to burn out. After the tubular heater is used, if the outer layer
When there is scale or carbon on the metal tube shell, it must be removed in time to avoid affecting the heat dissipation performance and service life of the tubular heater.
