Electric Stove Coil Heating Element
Electric Stove Coil Heating Element adopts metal tube as its shell, spiral electric heating alloy wires (nickel chromium or iron chromium alloy) are evenly distributed along the inner center of the tube. the gaps are filled and compacted with magnesium oxide sand with good insulation and heat conductivity. Annealed by 1050 degree high temperature furnace. both ends of the tube mouth are sealed with silica gel or ceramic.
Tubular heaters are available in Copper, SS304, SS 310, SS316, SS321, incoloy sheath.
Outer Diameter: 6.3mm~6.5mm
Model & Sizes:3,4,5 Circles(150mm/165mm/180mm)7" 8"
Type:with Bracket/without bracket
1.Electric Stove Coil heating element
2.Pipe material: SUS304,SUS316,SUS321.SUS309S, Incoloy 840
3.Pipe Diameter: 6.6mm, 8.0mm
4.Resistance wire: OCR23A15, NI80CR20
5.Two terminal 3,4,5 Coils with or without bracket type
Voltage & Power:110V-240V,500W-2000W
Heating elements for electric stove or cooking equipment
1- Electric Stove
2- Electric Hot plate Cooking
3- Electric Oven
4- Kitchen Appliance
1- The number of the coils of the element
2- Wattage and voltage
3- Usage environmental and max temperature;
4- Material and surface treatment;
5- Diameter and total length of tube;
6- The drawing is preferred.
The Electric Heating Tube, those metal components that get red-hot and generate heat, are the most important parts of any range. When the elements fail to heat properly, it's time to replace them. It's a simple procedure any electric stove owner can easily accomplish in a few minutes' time. You can usually identify a burnt-out element by blistering or small holes on the element's coils. A burner that plugs into a receptacle is easy to test, just unplug the non-heating burner, plug it into another working receptacle, restore the power to the range, and test it. If the burner works, you know its original receptacle is probably faulty. If it doesn't work in the good receptacle, the burner is bad and must be replaced. Do not be alarmed if a new element smokes a little when you first use it. This is a factory-applied green coating, that prevents scratches during shipment, burning away.