Water Immersion Cartridge Heater
Water immersion Cartridge heater is on Type of cartridge heater made and designed used for the immersion heating, We recommend 10 watts per square centimetre when cartridges are to be immersed in water because the water removes the energy from the element very effectively. Immersion cartridge heater Commonly used as a chemical solutions heater. For the immersion Cartrige heater, Stainless steel flanges are a convenient mounting method as well as a way to position a heater within an application. Flange style according to customer requirements . These flanges can be located in any no-heat section of the heater sheath. To order, specify flange, flange size and location.
Water immersion cartridge heater made by Jaye ensure excellent heat transfer and allows for operating temperatures to 1600ºF and high watt densities. One end of the heater is closed with a welded metal end-disc and wire leads exit at the opposite end which is typically closed with a lava seal. A variety of wire leads and lead protection options are available, like the Pure Nickel lead wire, Nickel Fiberglass wire, Silicone fiberglass wire, Teflone wire,etc. For the Lead protection: Stainless Steel Braid, Stainless Steel Hose, Ceramic Bead Insulation, etc. Heaters can be supplied with internal thermocouples, mounting fittings and many other options.
Resistance heating wire
Ni-Cr or FeCr
120V, 220V, 230V, 240V etc.
Stainless steel 304, 310S, 316, Incoloy 800
Min is 2.0mm, max is 30mm
Leading wire length
Min is 50mm, max is 2meter
7-10 working days
Type J, Type K
To order, please specify:
1) Diameter of the Cartridge heater
2) Overall length of the cartridge heater
3) If with Flange, what is the material and size of the flange request.
5) Lead end no-heat (cold zone) if different from standard
6) Sensors/controls and mounting