Meltblown cloth is a material used in masks to filter and isolate viruses。 The meltblown cloth extruder ceramic band heater is used in the extruder equipment for making meltblown cloth for the heating process. The standard size is with width 45mm, 50mm, 55mm, 65mm. The voltage can be customized to be 220V, 240V.
Features of using the ceramic band heater for the meltblown cloth extruder equipment
1. The ceramic band heater has fast heat transfer, uniform heat generation, and stable operation.
2. The ceramic electric band heater has no temperature leakage and can save electric energy. The outer cover is not hot when touched by hand, so it is safe to work.
3. High power of ceramic band heater
4. The ceramic heating coil adopts European and American high-temperature resistant heating wire, which has the characteristics of fast heat dissipation, uniform heat generation, high-temperature stability, etc., and can be used at a higher temperature for a long time.
5. The product life of ceramic electric band heater is long, because the raw material aging is relatively slow at high temperature, so the product life is long.
6. The ceramic heating coil meets the technical requirements of GB.
7. The electric strength of the ceramic heating coil: after the voltage 1500v / 50Hz sinusoidal AC voltage test, there is no breakdown phenomenon after 1MIN.
Structure of the ceramic band heater