KSD9700 Thermal Protector Thermostat
KSD9700 Thermal Protector Thermostat is a both temperature and current sensitive protector. It has a small size but high capacity. The KSD9700 Thermal Protector Thermostat is Closed type thermostat, which has the characteristics of rapid action, precise temperature control, large control current and long service life. The elastic element with environmental-friendly silver contacts is connected to the bottom plate, and the bottom plate and the spring plate are equipped with a temperature-sensitive bimetal disc, which is embedded in the case, and the heat is transferred to the bimetal plate, when the bimetal plate reaches the specified value Its instantaneous action cuts off the circuit in this way. When the temperature drops to the reset temperature, the bimetal closes quickly and turns on the circuit again.
The feature of KSD9700 Thermal Protector Thermostat:
•Positive make and break with snap-action disc
•No breakdown, no flashover.
•Rapid heat transmission.
•Every product will be tested, extremely high temperature pass rate.
Application of the KSD9700 Thermal Protector Thermostat:
KSD9700 Thermal Protector Thermostats are widely used in household appliances, electric force, telecommunications, machine tool, vessel, textile, printing, Mining machine, Mustic Instrument, etc.
1. Various types of motors / micro-motors
2. Induction cookers
4. Electric heating belts
5. Health equipment
6. Electric heating appliance
7. Water pump
8. Exhaust fan
9. Vacuum cleaner
10. Power tool
12. Various electric heating products and so on.
Precautions of Installing:
1. When using temperature-sensitive installation, make the product close to the installation surface of the controlled appliance.
2. Do not collapse or deform the plastic or metal casing during installation, so as not to affect the performance.
3. Metal shell products with insulation jackets must not be removed or crushed during installation to avoid leakage and ensure safe use.
4. If the product is used in a circuit with a current not greater than 5A, the copper core cross section should be 0.4-0.75㎜2 wire connected to it.
5. The product should be stored in a place where the relative humidity is less than 90% and the environment temperature is below 40 ° C in a ventilated, clean, dry, non-corrosive gas.