KSD 301 thermostat is composed of double metal chip and contact sensor. It is a kind of speed dynamic, sensitive, reliable, safe and stable action temperature switch. It should close until reaches 150 degrees Celsius, then the switch opens. When the temperature sensing overs the rated temperature, the original state of temperature controller contact is closed. It is widely use in the temperature control or protection for house hold electric appliances.
Specification of KSD 301 Temperature Control Switch:
Name: Thermal Control Switch
Temperature: 150 degrees Celsius
Action Temperature: 95C/203F
Circuit Resistance: 50MΩ
Insulation Resistance: 100MΩ
Mounting Hole Spacing: 2.4cm
Action Type: NC(Normal Close)
Rated Voltage: 250V
Rated Current: 10A
⑴ When using a installation of contact-temperature, the metal cover should be close to the mounting surface of the controlled appliance.
⑵ Do not deform the cover surface during installation to avoid affecting performance.
⑶ In order to prevent electric leakage, do not allow liquid to penetrate into the temperature controller during use, so as not to affect the electrical reliability.
⑷ When using, please follow the marked symbols and wire correctly.
⑸ The product should be stored in a warehouse with a relative humidity of less than 90% and a clean, dry and non-corrosive gas at an ambient temperature below 40 ℃.