Silicone rubber fiberglass insulated flexible heaters made by Jaye only use high quality raw materials and high strictly quality control system, which can improve heat transfer and accelerate the heating rate when controlled heating is needed in the confined area. There are two circuit designs available: etched foil or wound wire. No matter use which heating elements, Jaye only make the high durable and long life service silicone rubber flexible heaters.
Specifications of Silicone rubber fiberglass insulated flexible heaters:
Wattage: 5 to 1440 watts
Power supply: 115 or 230 * * VAC
Power density: 2.5, 5 and 10 W / in2
305 mm (12 inch) PFA insulation
Thickness: 0.040 inch (except at wire outlet)
Dielectric strength: 1250 VAC
Maximum temperature: heater
No PSA, 232 ° C (450 ° f); heater with PSA, 149 ° C (300 ° f)
Minimum temperature: - 56 ° C (- 70 ° f)
1. The highest temperature resistance of insulating materials: 250℃
2. Maximum operating temperature: 250℃-300℃
3. Insulation resistance: ≥5MΩ
4. Compressive strength: 1500v/5s
Can be made into various shapes and sizes (such as round, oval, cone).
It can be drilled, glued or bundled.
The maximum size is 1.2m×Xm, the minimum is 15mm×15mm, and the thickness is 1.5mm (the thinnest is 0.8mm, the thickest is 4.5mm). Lead length: 130mm standard, special order is required for sizes beyond the above.
Adhesive or pressure-sensitive adhesive or double-sided adhesive is added on the back to make the silicone heating sheet adhere firmly to the surface of the object. Easy to install.
We can custom made the heaters according to the voltage, power, size, and product shape required by the user (such as: oval, cone, etc.).