Silicone Rubber Enclosure Heater

Jaye Heater Technology Co., Ltd. is one of the most reliable manufacturers and suppliers of silicone rubber enclosure heater in China, also supports custom service. Welcome to wholesale high quality silicone rubber enclosure heater at competitive price from our factory.

Silicone rubber enclosure heater is a flexible sheet-like heating device. It is made by uniformly distributing the metal heating element in the shape of a dock and a wire in a glass fiber coated with high temperature resistant silicone rubber and pressing it at a high temperature. Its body is thin, usually 0.8~1.5MM thick. The silicone rubber enclosure heater is light in weight, generally 1.3~1.9 kg per square. It has rapid heating and rapid temperature rise. It has a large heating surface, uniform heating, weather resistance, corrosion resistance, environmental protection, and resistance. The characteristics of combustion, easy installation, long life and high insulation strength are used in many heating devices. Foldable, it has good flexibility and can be in close contact with the heated object. It is flexible and easier to be close to the heating body, and the shape can be changed to design heating according to the requirements, so that the heat can be transferred to any place needed.

Custom features

Can with or without integrated thermostat

Provide custom design and alternate thermostat settings

The heater is vulcanized to the aluminum mounting plate for easy installation

120V standard customized voltage can be provided upon request

1.2 m (48") PTFE lead wire standard

Safe operation, no exposed electrical connections

13 mm (1/2 inch) mounting flange

Instructions for use

1. When using this type of electric heating device, it must be noted that its continuous operating temperature should be less than 240℃, and the instantaneous temperature should not exceed 300℃.

2. The electric heating device of the silica gel heating sheet can work and be pressed, that is, the auxiliary pressure plate is used to make it close to the heated surface. At this time, the heat conduction is good, and the power density can reach 3W/cm2 when the temperature of the working area does not exceed 240℃.

3. The allowable working temperature is less than 180℃ in the case of pasting installation.

4. In case of dry burning in the air, the power density should be less than 1 W/cm2 due to the temperature resistance of the material; in non-continuous working conditions, the power density can reach 1.4 W/cm2.

5. The working voltage selection is based on the principle of high power-high voltage and low power-low voltage, and special needs can be listed.

Hot Tags: silicone rubber enclosure heater, China, manufacturers, suppliers, factory, wholesale, custom, price, electric, high quality, IBC Tank Heater, Heat Resistant Silicone Rubber Bands, Silicone Rubber Warmer, Silicone Strip Heater, Silicone Rubber Heating Blanket, Silicone Heating Plate