Pipeline and valve silicone rubber heater is an energy-saving device that pre-heats the material. It is installed before the material equipment to achieve direct heating of the material (with insulation) to circulate at high temperature The effect of heating eventually achieves the purpose of heating and heat preservation. It is widely used in the preheating of oil fields pipelines, asphalt, clear oil and other fuel oil.
For different applications and requirements, Jaye has a variety of technologies and products that can be used for pipeline heating (including pipeline-connected pumps and valves) to form a complete system solution.
Silicone rubber heater is vulcanized and applied inside and outside the metal pipe. It is suitable for industrial electric heating sleeves with shorter standard pipes, excellent heat transfer effect, flanges and valve heating sleeves that integrate heat preservation and heating.
According to the production requirements, it is divided into the following three types:
1. It can be directly wound (the heating tape should not overlap during winding) on the surface of the pipe, and then strengthened by the shrinkage force of self-adhesive;
2. It can be made with 3M adhesive on the back. When installing, remove the adhesive layer and wrap it around the pipe;
3. If it is made according to the circumference and length of the pipeline: Rive a metal buckle at the reserved holes on both sides of the heating belt, and use the tension of the spring to adhere to the heated part; outside;