In the cold winter, the oil through the pipeline may be frozen because of the low temperature. Thus we need to heat the oil, and heat the oil pipeline externally would be the best way for heating it.
As the flexibility and can be curved, easy to be shaped features, the silicone rubber heater is widely commended to be used for the oil pipeline. It can be made with the least width about even 1" (25mm) and the length with no limited depending on the oil pipeline required. Working temperature about 180℃ and 200℃ with silicone rubber material and fiberglass silicone.
We Jaye Industry also supplies other customized silicone rubber heaters and silicone heater mats for different industries, like medical, aeronautical, military, food service, etc which requires heat and benefits from the heating.
General technical parameters
Temperature use range -60 ℃ -250 ℃ heating. The voltage can be customized according to user requirements. The highest power density is 2.1W / cm2. There are two kinds of heating cores: high resistance alloy wire and metal foil. 1) Maximum temperature resistance of insulation material: 300 ℃ 2) Maximum use temperature: 250 ℃ 3) Dielectric strength: ≥AC1500v / 5s 4) Insulation resistance: ≥200 MΩ5) Power deviation: ± 5% 6) Widest: 1000mm; The longest: unlimited length (good effect within 12 meters); thickness: standard 1.5mm (thinnest 0.8mm, thickest 5mm) lead length: standard 500mm, beyond the above dimensions can be customized.