Silicone rubber oil drum heaters are also known as: oil drum heater, oil drum heater sheet.
Silicone rubber heater has good waterproof performance, it can be used for the heating, tracing and insulation of pipes, tanks and tanks of industrial equipment or laboratories in damp and non-explosive gas places, it can be directly wound on the surface of the heated part, it is easy to install, safe and reliable. The silicone rubber oil drum heater makes it easy to take out the liquid and solidified material in the drum, such as adhesive, grease, tar, paint, paraffin, oil and various resin raw materials, through the barrel body heating, so that the viscosity decline even, reduce the pump power. Therefore, not affected by the season, can be used all the year round. A sensor is installed on the heater surface to control the temperature through temperature regulation directly.
1.Tubular heaters of 200 litres size 250×1740 capacity 200V 2000W weight about 0.5kg
2.Tubular heaters of 20 litres size 200×860 capacity 200V 800W weight approx. 0.4kg
3.Tubular heaters of 200 litres size 125×1740 capacity 200V 1000W weight approx. 0.3kg
4.Temperature adjustment: 30~150℃ EGO
1. Maximum temperature of insulation material: 250 ℃
5. Power deviation: ±8%, rated service voltage: ±5%
6.Maximum length: 3000mm, thinnest thickness: 1.5mm, normal thickness: 1.8mm
(1) It is mainly composed of nickel-chromium alloy wire and insulating materials, with fast heating, high thermal efficiency and long service life.
(2) Alkali - free glass fiber core plus wound electric heating wire, the main insulation is silicone rubber, good heat resistance, reliable insulation performance.
(3) Excellent softness, can be directly wound on the heating device, good contact, uniform heating.
Silicone rubber electric sheet is a kind of special soft fixed-length heating sheet, high power density, except for heat tracing and heat preservation for general constant power sheet, it can also be used to heat the place where is needed in some cases.
(1) During installation, the silicone rubber plane side of the electric sheet shall be closely attached to the surface of the medium pipe and tank body, and shall be fixed with aluminum tape.
(2) In order to reduce the heat loss, the insulation layer should be added outside the electric sheet zone.
(3) It is strictly prohibited to overlap and wrap installation to prevent overheating and damage.
Jaye industry make the silicone rubber oil drum heaters custom made, and we are always make the silicone rubber heaters perfectly fit for your heating objects. any requirements just inform us!