Fiberglass Insulated Silicone Drum Heaters
Fiberglass-insulated High Temperature silicone rubber gives the Drum heater dimensional stability and higher temperature resistence without sacrificing flexibility. Compare with normal Silicone rubber heater, the Fiberglass-reinforced high temperature silicone rubber heater made by Jaye industry have higher quality performance, higher temperature resistance, more stability, higher heating transfer rate, more even of heating, and long life time service more than twenty years.
Feature of Fiberglass-insulated Silicone Drum Heaters
1-The excellent performance of the Fiberglass-reinforced drum heater is based on its special construction and processing procedures.
2-It consists fiber glass reinforced multi-layer of silicone rubber.
3-These pieces of silicone rubber are bonded together by heating and pressing.
4-Wire mesh or etched foil elements are embedded in a layer of silicone rubber sheet.
5-These sheets will be vulcanized to become stronger and softer.
6-After all these processes, the silicone drum heater can withstand industrial use and is resistant to most chemicals and moisture.
7-For high power density applications, a Fiberglass-reinforced High Temperature silicone drum heater with etched heating foil is recommended.Compared with the electric heating wire, the etched electric heating foil has larger surface and shorter distance.
8-These characteristics lead to higher heat transfer coefficient and more uniform heat distribution.
There are three Types of mounting: Spring Type, Snap-fastener Type, and the Velcro Type.
1, First of all please clean up the surface of drums. Secondly wind the heater around the drum tightly and fix it with springs.
2, In order to reduce the heat loss, it is available to use thermal insulation layer outside the heater.
3, Do not wind the heater superposed. It is possible to be over-heating.
4, The surface of heater should stick to the surface of drum tightly ensure the best heat transfer.