Industrial Thermocouple Accessory Aluminum Kne
Product Details
Jaye Heater Technology Co., Ltd. is one of the most reliable manufacturers and suppliers of industrial thermocouple accessory aluminum kne in China, also supports custom service. Welcome to wholesale high quality industrial thermocouple accessory aluminum kne at competitive price from our factory.
KNE Thermocouple is a highly specialized and advanced kinematic coupling system, specifically a type known as a Kinematic Non-Overconstraining Externally Actuated Design. It is a precision engineering solution designed for ultra-repeatable and predictable positioning and connection between two objects.
Specification
| Product name | Thermocouple Head |
| Material | ACD12 aluminum, SS304, SS316 |
| Protection tube entry | PF1/2", PF3/4", NPT1/2", NPT3/4", BSP1/2", BSP3/4", M20X1.5 |
| Color available | silvery, yellow, red, blue, black, etc |
| Screw distance | 33mm, 36mm, 40mm |
| Form of terminal block | 2 poles, 3 poles, 4 poles, 6 poles |
Advantage
Extreme Repeatability
This is its primary advantage. Because the position is defined by only six points of contact on hardened, polished surfaces, the same two parts can be disconnected and reconnected with exceptionally high repeatability. The repeatability is often in the single-digit microns or even sub-micron range.
Predictable and Known Behavior
The performance is mathematically predictable. Engineers can calculate the expected repeatability, stiffness, and load capacity based on the geometry and materials of the balls and grooves. This reduces uncertainty in the design phase.
Freedom from Internal Stress
Traditional mounting methods can warp or stress components if the mounting surfaces are not perfectly flat or if bolts are over-torqued (a problem known as "over-constraint").
Wear Resistance
The contact between the sphere and the V-groove is a Hertzian contact, which is very resistant to wear. Furthermore, any wear that does occur simply allows the sphere to sit slightly deeper in the groove, often without degrading the repeatability of the position (a principle known as the "Law of Cosine Errors").
Application
Metrology and Precision Measurement:
- Coordinate Measuring Machines (CMMs): Used to precisely mount and quickly change probe heads, styli, or even the workpiece itself, ensuring measurement integrity after re-fixturing.
- Laser Interferometers and Autocollimators: Mounting of mirrors and optics for alignment systems, where a shift of even a micron can invalidate measurements.
- Calibration Equipment: Providing a known, repeatable reference datum for calibrating other instruments.
Semiconductor Manufacturing (Semiconductor Fab Equipment):
- Photolithography Steppers/Scanners: These machines, which pattern circuits onto silicon wafers, use kinematic couplings to mount and align the incredibly precise lenses, reticle masks, and wafer stages. The need for nanometer-scale alignment is absolute.
- Wafer Inspection and Metrology Tools: For mounting and exchanging sensors, cameras, and light sources without losing alignment.
Optics and Photonics:
- Mounting of Lenses, Mirrors, and Lasers: In optical benches and complex systems like space telescopes or gravitational wave detectors (e.g., LIGO), components must be positioned and aligned with extreme precision and must remain stress-free to avoid optical distortion.
- Modular Optical Systems: Allowing researchers to quickly swap out lasers, filters, or detectors on an optical table while maintaining their relative position.
Automation and Robotics:
- End-of-Arm Tooling (EOAT): Enabling robots to change tools (e.g., grippers, welders, drills) with very high repeatability. This is critical for flexible manufacturing cells.
- Reconfigurable Fixturing: In assembly lines, workholding fixtures can be quickly changed over for a new product while ensuring the part is held in an exact, known position.
Aerospace and Defense:
- Mounting of Inertial Guidance Systems and Gyroscopes: These sensitive instruments must be mounted in a stress-free way to ensure accuracy.
- Modular Payloads for Aircraft and Satellites: Allowing sensors or instruments to be removed and re-installed without the need for complex realignment procedures.
Research and Development:
- Used in countless physics, engineering, and materials science labs for setting up experiments where precise and stable positioning of sensors, samples, or instruments is non-negotiable.
How to order
If you are interested in mica band heater, please share information as below:
- Quantity
- size
- power
- voltage
- drawing/photos
Hot Tags: industrial thermocouple accessory aluminum kne, China, manufacturers, suppliers, factory, wholesale, custom, price, electric, high quality, Hair Dryer Thermal Fuse
