2 Holes Mgo Magnesia Tube
The MgO ceramic tube made by Jaye industry use high-purity fused magnesia as raw material, which is made by high-pressure automatic extrusion and burned in a 1700 degree tunnel type push plate cellar furnace with high density (2.3g / ml). The level of insulation and withstand voltage products is constantly improving by Jaye industry.
The MgO tube used for high-power crtridge heaters and hot runners, armored wire, armored heater, etc. The MgO tubes made by Jaye industry has the advantages of high insulation, high pressure resistance, high temperature resistance, low conductivity and good heat transfer effect.
Product Name | 2 Holes Mgo Magnesia Tube |
Material: | 99% MgO / 99.7% sea water MgO |
OD (outer Diameter): | 1.5mm-24mm |
ID (Inner Diameter): | 0.6mm-8mm |
Length: | 50mm-500mm |
Color | White / Light Yellow |
Density | 2.9g/cm2 |
Max working Temperature | 1500℃ |
Break Strength | 110-200N |
Withstand Voltage | 2600V/minute no flash and breakdown |
Packing | Exporting standard carton box well protected |
At present, we can produce all kinds of magnesium tube (rod) with single hole, double hole, four hole, five hole, six hole, eight hole and nine hole. MgO Tube with an outer diameter range of 2.0mm-25mm can be produced, or can be produced according to the requirements of customers.
Typical applications:
* Heating element
* Thermocouple tube
* High temperature crucible
* Kiln furniture
