Why has silicone rubber liquefied gas heating belts sold for many years?
There are several reasons why silica gel liquefied gas heating belts have been selling well for many years:
1.Solved the problem of unobstructed air flow caused by lower ambient temperature.
When the company designs the liquefied gas cylinders, it is produced at 50 degrees Celsius and a pressure of 1.6 MPa. When the temperature of the external environment is lower, the pressure in the cylinder becomes smaller, which causes the liquefied gas to be unable to flow out smoothly when the temperature is low, thereby affecting the efficiency.
2.Solve the problem of residual liquid.
The main components of liquefied gas are carbon three and carbon four. Driven by profit, the general oil refinery separates propylene through a device, resulting in a reduction in the three components of carbon and causing the liquefied gas to become heavier. Because the components of carbon and carbon five are qualified, the unqualified liquefied gas can also pass the inspection and leave the factory. The problem of high ambient temperature in summer is not obvious, but when the temperature is low in winter, a large amount of residual liquid will be caused.
3.To make up for the shortcomings of other heating methods, it is currently a safe and easy-to-use auxiliary heating belt for liquefied petroleum gas.
Roasting with fire, open flame is too dangerous for liquefied gas cylinders, and safety cannot be guaranteed. Use hot water to shower, the speed is slow, the effect is not good, the temperature is uneven, and it is very troublesome to use, and miss work and time.
