What should I pay attention to when electric immersion cartridge rods are in boiling water?
The explosion-proof electric immersion cartridge heating rods(hereinafter referred to as the electric heating rod) is a product specially designed and manufactured for the electric heat tracking and heat preservation of storage tanks and other containers. For a long time, the heat tracking and heat preservation of the medium in the storage tank is mainly based on the tray heater with steam or hot water as the heating medium. Generic heaters have problems such as high accident rate, difficult maintenance, and high energy consumption.
Precautions to safely use electric immersion cartridge rods to boil water:
1. When boiling water, the water must be soaked in the electric heating rod.
2. Make sure to put it in something that does not conduct electricity to boil water.
3. Do not touch the water when boiling, because the water is filled with water.
4. Do not take it out immediately after boiling, because its heating wire is not cooled, which is not good for the heating rod.
5. When using an electric immersion cartridge rod, it is best to have charging time, and cut off the power immediately after burning.
6. Pay attention to the time interval during use to prevent the electric heating rod from cracking.
7. After using for a period of time, use vinegar + wire brush to clean the surface of the scale after cooling.
8. The power supply must be stable.
9. Apply a dry cloth to dry after each cooling for the next use.
