What Are The Instant Heating Technologies Applied To The Faucet?
With the development of science and technology, faucet heaters are gradually approaching people's lives. Washing hands in cold water in winter makes the dishes tingling, and the hands often have frostbite, which makes them very uncomfortable. Add a water heater to the faucet, so people don't have to worry about this problem. So how is the instant water heater heated?
In fact, there are three heating technologies in the rapid heating industry, namely: metal heating technology (divided into stainless steel and copper), crystal (quartz) heating technology and nickel-gold heating technology. How does the faucet instant water heater heat it?
The principle of metal heating technology is to place a cup made of stainless steel or copper in a spiral heating tube, because the principle of "quick heating" for boiling water is similar. After market verification, the shortcomings of this heating technology are obvious, and it is easy to scale and scale. Leakage, leakage, leakage, the safety side is not guaranteed, and the service life is not long.
Crystal (quartz) heating technology. The principle of this heating technique is to coat a carbon film on the wall of the transistor (glass). After heating, the heat is transferred from the transistor to the water in the transistor through the carbon film. As you can imagine, the thermal conductivity of crystals (glass). The performance is not very good, so in the heat transfer process, a lot of heat will be lost, resulting in low heating efficiency.
In addition, the carbon film on the outer wall will slowly decay over time, and the heating efficiency will become lower and lower. In addition, the stability of glass is not high, and safety problems may also occur when encountering extreme cold and heat.
Nickel-gold heating technology is also called "nickel-gold bare wire heating technology".
The heater is composed of nickel alloy, and the nickel content is as high as 80%, which is 5 times that of ordinary heating method, that is, nickel 80. The thermal efficiency is much higher than the traditional heating method, the heat transfer speed is fast, and the heating effect is good. In addition, dirt is the main reason that affects the life of the heater. The formation of fouling requires a temperature higher than 63 degrees. The nickel-gold heater has good thermal conductivity and is better than other materials, so that the local temperature difference is less than 63 degrees, which is completely realized in the condition of no mass production, so the heat transfer speed is fast. After long-term use, the heating effect and its own quality remain unchanged . In addition, the nickel-gold heater has super corrosion resistance, suitable for normal operation of any water quality, and greatly extends the service life of the water heater.





