This is largely affected by its function. The efficiency of the finned tube is very high.
The finned tube is a wear-resistant, new and efficient heat exchange material. It is a high-efficiency and energy-saving heat exchange component in the process of utilization. The equipment is mainly used for high-frequency power as a heat source to effectively heat steel pipes and steel strips at the same time. , Which will make it welded together as a whole.
Finned tubes have high thermal efficiency and heat dissipation area, long operating life and suitable temperature scale, and are widely used in petrochemicals, economizers, waste heat recovery, greenhouses, power plant boiler greenhouses, and industrial fields, such as wood rigidity.
The fin tube assembly is simple and economical. The connection points are reduced, and the assembly will become more economical and efficient. To a certain extent, it will also reduce the chance of connection leakage. The simple shelter product does not require maintenance after the assembly is completed.
The finned tube has high operating efficiency and high efficiency in the production process of steel pipes and fins, and the heat dissipation area is 8 times more than that of the light tube. The internal products will be smoother and the internal flow resistance will be small.
1. Regularly search for whether the fin tubes are cleaned successfully, and whether there are deposits, coking, scales, etc., and wash them immediately. At the same time, it is necessary to search whether the adhesion between each fin tube and the rubber gasket is precise, and whether the rubber gasket is complete, so as to save the leakage caused by the rubber gasket degumming and crushing.
2. The pressure nut and the upper and lower guide rods of the plate-type thermal regulator should be smoothed by force from time to time with slippery grease.
3. Each instrument adjustment should have dedicated personnel to work hard, and strictly implement the operation procedures for operation and maintenance.
4. Every time the finned tube is re-tightened, the position of the scale at the time of the first pressing must be on the surface. Do not over-press the rubber gasket, or even reduce the service life of the gasket.
5. When replacing the fin tube rubber gasket, all the sections must be updated to avoid uneven gaps between the fins, which will affect the heat transfer results.
