Use maintenance and precautions
1. Dimension "B" in the outline dimension drawing must be completely immersed in oil to avoid burning out the components. The heated oil should be non-corrosive.
2. The working fluid level of SRY3 type must be below the fastener and above the dimension line "B".
3. When melting bitumen, paraffin and other solid oils, the voltage should be lowered for use, and then raised to the rated voltage after melting. In order to prevent the power concentration from reducing the service life of the components.
4. When carbon buildup is found on the surface of the tube, it must be removed before use to avoid reducing efficiency or even burning components.
5. The components should be stored out of dryness. If the insulation resistance drops below 1 megohm due to long-term storage, they can be dried in an oven at about 200°C for several hours (or pass the components under low pressure for several hours), or restore the insulation. resistance.
Features:
1. Most of the hot air circulates in the box with high thermal efficiency and energy saving.
2. Using the effect of forced ventilation, an adjustable air distribution panel is installed in the box to dry the materials evenly. The heat source can be steam, hot water, electricity, far-infrared, and wide selection.
3. The whole machine has low noise and stable operation. Automatic temperature control, easy installation and maintenance.
4. It has a wide range of applications and can dry various materials. It is a universal drying equipment.
Application scope and purpose:
The hot-air circulation oven is suitable for the heating, curing, drying and dewatering of materials and products in the pharmaceutical, chemical, food, agricultural and sideline products, aquatic products, light industry, heavy industry and other industries. Such as raw materials, traditional Chinese medicines, Chinese herbal medicines, extracts, powders, granules, granules, water pills, packaging bottles, pigments, dyes, dehydrated vegetables, dried fruits, sausages, plastic resins, electrical components, baking paint, etc.
The main technical parameters and related instructions of the hot air circulation oven:
1. The heating source is steam, electricity, far-infrared, and electric steam for users to choose from.
2. Operating temperature: 50-140℃ for steam heating, up to 150℃.
3. The temperature of electricity and far-infrared is 50～300℃.
4. The usual steam pressure is 0.2～0.8Mpa (2～8KG).
5. There are three materials: carbon steel, aluminum plate and stainless steel.
The strong blast circulation system with unique design ensures temperature stability. The temperature control system adopts digital display temperature control, which is intuitive and eye-catching. It is equipped with a reliability protection device and an over-temperature alarm. For special requirements, the imported production line can be designed and customized for users.
