Silicone electric heating film is a flexible electric heating film module made of high heat transfer grounding silica gel, heat-resistant glass fiber cloth and metal heating film circuit. Silicone heating elements have excellent flexibility and can fully contact the heated object. The silicone heating plate can be made into any shape.
Silicone electric heating pads have excellent aging resistance and weather resistance. As a thermal conductive material on the surface of the electric heating plate, it can reasonably avoid the surface cracking of the product and improve the impact toughness. Silicone electric heating pads have excellent bio-corrosion resistance. Silicone resin heating plates can be used in harsh environments such as humid cooling and irritating gases.
1. Under the condition of adhesive installation, the allowable working temperature of the silicone electric heating plate is less than 150°C.
2. It must be noted that the working temperature of continuous use of silica gel electric heating film should be lower than 240℃, and the rise time should not exceed 300℃. The silicone heating plate is easy and reliable to install.
3. The selection of working voltage is based on the standards of high power-high current, low thermal efficiency-low voltage. The special needs of silica gel heating plates can be eliminated.
4. If the air dry firing conditions are limited by the high temperature resistance of the material, the power density of the silica gel heating plate should be less than 1W/cm2; under discontinuous working conditions, the power density of the silica gel heating plate can reach 1.4 W/cm2.
5. The silicone electric heating pad can be operated and pressed, that is, the auxiliary pressing plate is used to make it close to the heated surface.
6. The silicone electric heating plate is easy to install, and the silicone electric heating plate is easy to install. It is believed that it can be used in humid and cold places where there is no combustible gas.
