The silicon rubber heater is a kind of heating sheet with the standard thickness of 1.5mm. The heating element is etched with nickel chromium wire or nickel chromium foil with thickness of 0.05 mm-0.10 mm into a certain shape. The two sheets are made of heat-conducting insulating materials, which are molded at high temperature and heat treated by aging, so it has high reliability. With the adhesive, it’s easier to stick to some certain products to suit the requirements.
The silicone rubber heater is a red soft film that can be closely attached to various curved surfaces, and can be made according to various shapes and powers. The utility model can be closer to the object to be heated and the shape can be changed according to the requirements, and can provide an efficient and uniform heating surface with small volume and small temperature difference.
Technical specifications：
1. Temperature range: - 40.00 ~ 200.00 ℃
2. Accuracy of resistance value: ± 8% (whichever is greater)
3. Power density: 0.10 ~ 1.50w/cm2
4. Mechanical pressure: 100.00kg/cm2
Minimum bending radius: 3.20
