Installation Precautions for Capillary Thermostat Switch for Water Heater
Capillary thermostat switch for water heater has the characteristics of accurate temperature control, stability and reliability, small temperature difference between start and stop, large temperature control adjustment range, and large overload current. It is mainly used for temperature control occasions such as household appliance industry, electric heating equipment, refrigeration industry and so on. So what should you pay attention to when installing? Let's take a look.
1. At least one in each heating room. In order to ensure the safety of electricity, the installation area of a house larger than 100 square meters should be no less than 40 amperes for the household metering meter, and the power cord reserved for the wall should not be less than 2.5 square meters. A single room with an area of more than 40 square meters must be installed with 2 thermostats .
2. The Capillary thermostat switch for water heater should be installed on an easy-to-operate wall with an installation height of 1.3-1.5 meters. Each thermostat is equipped with a separate power switch. It should not be located in a location that is blocked or exposed to direct sunlight.
3. The maximum load of the Capillary thermostat switch for water heater should meet the requirements of the product manual, and the temperature control range is 5-30 degrees.
4. After the room is decorated, install the thermostat according to the position and height determined by the design drawings.
5.The Capillary thermostat switch for water heater should be installed on the cassette. There should be no gaps around the box. The thermostat should be installed correctly, the panel should be close to the wall, and the thermostat should be wired according to the instructions. Do not change the shape of the external wiring terminal at will, so as not to affect the electrical reliability, and have insulation protection measures to prevent leakage and ensure safe use.
The above is the capillary thermostat switch for water heater that we introduced to you. I believe everyone now has a certain understanding of its working principle and installation precautions. Understanding this knowledge is actually very beneficial for you to choose a thermostat. Finally, we recommend that the installation of the capillary thermostat switch for water heater is best done by professionals to avoid danger.
