Installation method of thermal conductive silicone heater
1. Keep the end of the thermal conductive silicone rubber heater sheet clean, prevent the thermal conductive silicone rubber heater from sticking to dirt, and the self-adhesive and sealing thermal conductivity of the thermal conductive silicone rubber heater sheet will get worse.
2. When taking the thermal conductive silicone heater sheet, the large area of the thermal conductive silicone rubber heater sheet should be grabbed from the center, and the small area of the sheet is not required to grab, because the large heat conductive silicone rubber heater sheet is not evenly stressed, which will lead to deformation, affect the subsequent operation, or even damage the silicone rubber heater sheet.
3. Take the sheet in the left hand and tear off one side of the protective film in the right hand. Both sides of the protective film can not be removed at the same time to reduce the number and area of direct contact with the thermal conductive silicone rubber heater sheet, and keep the self-adhesive and thermal conductivity of the thermal conductive silicone rubber sheet undamaged.
4. Tear off the side of the protective film toward the radiator, and align the heat-conductive silicone rubber sheet with the radiator first. Slowly put down the heat conduction silicone sheet. Care must be taken to avoid the formation of bubbles.
5. If bubbles are produced in the operation, one end of the silicone sheet can be pulled up to repeat the above steps, or the bubble can be gently wiped with the help of a tool. The force should not be too large, so as to avoid damage to the heat-conducting silicone sheet.
6. Tear off the other side of the protective film and put it into the radiator. Tear off the last side of the protective film with less strength to avoid pulling or pulling up the heat-conductive silicone rubber heater sheet.
7. After fastening or using strong viscous thermal conductive silica gel sheet, apply a certain pressure to the radiator and store it for a period of time to ensure that the thermal conductive silicone rubber heater sheet is fixed.
Thermal conductive silicone heater cooling effect is very good, and in the installation process of thermal conductive silicone rubber heater, it is recommended that we should be careful, not to be impetuosity, resulting in bubbles and thermal silicone rubber heater damage, otherwise a waste of money, but also delay the time.
