Here are some general steps to follow when using a cartridge wax heater:
1-Make sure the wax cartridge heater is properly installed and seated securely in the heater unit.
2-Plug the heater unit into a power source and turn it on. Most cartridge wax heaters have a switch or a temperature control to set the desired temperature.
3-Allow the wax to heat up for several minutes until it is melted and has reached the desired temperature. This usually takes about 10-15 minutes.
4-Once the wax has reached the desired temperature, you can apply it to the skin or use it with a waxing strip or spatula.
5-Apply the wax in the direction of hair growth, and then apply a waxing strip over the wax.
6-Press the waxing strip firmly onto the skin, and then quickly remove the strip in the opposite direction of hair growth.
7-Repeat the process until you have removed all unwanted hair.
8-When finished, turn off the heater unit and allow it to cool before removing the wax cartridge.
It is important to note that the exact steps for using a cartridge wax heater may vary depending on the specific product and manufacturer's instructions. Always follow any safety guidelines provided by the manufacturer and use any devices or tools as intended.
