The flange heater structure is to weld multiple U-shaped heating tubes on the flat flange for centralized heating, which is also called high-power cluster heater. The flange heating tube is used for forced convection or natural convection to control various flows or Static liquids and gases are heated. It is mainly used for heating in open and closed solutions and other containers and circulation systems.
The use and maintenance of flange electric heaters:
1. Pay attention to the difference between delta connection and star connection, and the voltage used should not exceed the rated voltage;
2. The electric heating tube must be effectively grounded;
3. Use the correct type of lug (appropriate diameter and appropriate power cord specification), and use a suitable clamping tool to clamp the lug on the wire;
4. After the electric heating tube has been working for a certain period of time, it is recommended to take it out again and use a soft cloth for mechanical wiping, and it is forbidden to clean it with chemical cleaning fluid.
Flange type electric heater product application:
Flange-type electric heaters are mainly used for heating water, oil, and corrosive liquids in static and flowing states. They are used as water tanks, electric boilers, medical machinery equipment, chemical industry containers, pipes, reactors, auxiliary tanks, and water. Steam heating, solution tank, electrolytic tank for heating and insulation. Installation method: Weld the external pipe and the female flange and the heating pipe on the container.
