How to repair and maintain electric kettle heating plate?
Electric kettle is a very common tool for boiling water nowadays, and it is loved by many people. But if it is used for a long time, its heating plate will be more prone to problems. Today I want to introduce you The question is how to repair the heating plate of the electric kettle. I hope it can help everyone.
1. The electric kettle is broken but the power switch is normal. If the power switch is normal, the fault mostly occurs in the heat preservation switch.
2. No heating after power on, but the indicator light is on. The indicator light is on, indicating that the power supply has been added to the indicator circuit, and the fault is in the electric heating tube or its connection part.
Common electric heating tubes are damaged and poor contact. It can be judged by removing the electric heating tube and measuring its resistance.
3. The electricity cannot be cut off after the water boils, mainly due to the failure of the reset switch.
4. The heating speed is slow. The common causes are low power supply voltage, poor contact of indoor power lines or plug sockets, which should be eliminated first. Then check whether the electric heating tube is seriously fouled, whether the contact between the base and the power plug seat of the kettle body is seriously bad, etc.
The above has introduced us in detail the repair methods and maintenance methods of the electric kettle heating plate. I believe that everyone should have a certain understanding of this aspect.
