The air PTC heater is mainly used to heat the desired airflow from the initial temperature to the desired air temperature. Air heaters have a wide range of uses: they can heat any gas. The generated hot air is dry, moisture-free, non- conductive, non-flammable, non-explosive, non-chemically corrosive, non-polluting, safe and reliable. The heating of the space is rapidly and controllable.
So how to reduce the pressure loss of the air PTC heater itself?
1. Improvement of air temperature and reasonable design of Air PTC heater.
2. The air to be heated flows through the air PTC heater and produces a pressure loss. The pressure loss is large, and the energy consumption of the fan is also larger. By improving the structure of the Air PTC heater itself, the pressure loss is minimized.
3. Air PTC heater should be installed on the surface of insulating layer. In the use of air PTC heater, the heat preservation is only in the water outlet pipe of the electric heater, and the heater surface itself is not heat treated.
Comparative data show that adding thermal insulation layer can reduce energy consumption by 5% to 10%.
Operating on the surface of the air PTC heater for a long time is very important to save energy consumption.
At the same time, an insulation layer should be installed in the pipeline, and the insulation layer should be installed in the air PTC heater.
